发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

现代分析仪器在高中化学教学中的应用*——以“防晒霜的防晒效果实验探究”为例

从高中化学原子、分子等抽象性的知识教学出发,以防晒霜的防晒效果实验探究为例,探讨了现代分析仪器在高中化学教学中的应用。通过利用现代分析仪器紫外可见分光光度计,结合紫外线变色球实验探究防晒霜的防晒效果,分析并认识防晒霜中化学防晒的机理。结果表明,防晒霜的厚度越大、SPF越高,防晒霜的防晒效果越好,并且防晒霜的防晒效果可以持续一段时间,但是不同类型的防晒产品存在一定差异。在化学教学中渗透现代分析仪器的应用,为学生进一步了解化学学科在改变学习方式、拓宽学科知识领域、推动自身全面与可持续发展方面打下坚实的基础。     

超导磁共振仪器设备国产化现状及挑战

磁共振在化学分析和医学影像等领域发挥着不可或缺的作用，而磁共振仪器设备是开展磁共振研究的必要前提.长期以来，国外仪器厂商在我国磁共振仪器市场居于垄断地位.近年来，随着我国在磁共振仪器研发和产业化方面不断取得进展，市场份额为外商垄断的局面已大为改观.本文调研综述了我国磁共振仪器设备研制的现状，以及面临的若干挑战.     

Benefiting from information-rich multi-frequency AC voltammetry coupled with chemometrics on the example of on-line monitoring of leveler component of electroplating bath

Simultaneous application of multiple sinusoidal waveforms perturbations superimposed onto DC staircase step significantly enriches current response. The measured current is characterized by a matrix of data rather than a conventional voltammetric output in a form of a vector. This increase of the dimensionality of the current response and therefore the wealth of analytical information is achieved without compromising the time of analysis. The natural approach for compression of such data and extraction of relevant information is by utilizing multi-way chemometric decomposition techniques. An electroplating solution presents a very challenging analyte for electroanalysis as its constituents interact synergistically with each other during both the plating process and its simulation during electroanalysis. For some components the mechanism is not entirely understood. Therefore, the only way to benefit from the analytical data is by employing soft modeling. The electrode processes involving additives rely heavily on adsorption and, indirectly, on electron transfer kinetics for which AC voltammetry is an analytical technique capable of delivering informative signals. This paper presents a rigorous universal method for calculating and validating an exemplary multi-way calibration of a leveler component in a copper electroplating bath used in the semiconductor industry. The method presented employs comparatively Parallel Factor Analysis coupled with Inverse Least Squares Regression and multi-linear Partial Least Squares. The calibration training set consists of multi-frequency AC voltammetric data subjected to pretreatments aiming to select informative independent variables and exclude outliers.     

复合纤维增强混凝土阻尼测试装置开发与试验研究

纤维与聚合物的掺入可以明显改善混凝土材料的阻尼性能。本文首先给出了正弦交变激励下粘弹性材料三点弯曲梁阻尼特性关系,其次首次自主开发了大尺寸材料的阻尼性能测试装置,然后利用开发的装置在频率(0.5~2.0Hz)条件下测定了6种不同配比复合纤维增强阻尼混凝土的损耗因子与储存模量,最后对纤维的阻尼增强机理进行了初步探讨。试验结果表明:复合纤维增强阻尼混凝土与素混凝土相比,提高了混凝土的损耗因子80%~200%。主要原因是聚合物分子在外力作用下的内耗增加了普通混凝土的阻尼能力,而纤维的阻尼增强机理在于纤维的掺入增加了纤维与水泥基材的界面摩擦力。     

用自制仪器精确测定变温液体的粘滞系数

介绍了用恒流法自制仪器精确测定液体的粘滞系数.该自制仪器,能有效地保证底部的密封性、液体水位恒定和可操作性,还增设一个玻璃管连通器,附加一根标尺和游标使液体水位的测量精确度提高.并在接毛细管输出液体的量筒处加上光电计使测量液体流速的精确度提高,采用该仪器测定了水和乙醇两种液体在变温条件下的粘滞系数,经实验比对,所测得结果与理论值能较好地吻合.同时设计了可调换不同管径的毛细管,能快速准确地测量多种变温液体的粘滞系数.     

Approximate inertial manifolds for reaction-diffusion equations in high space dimension

The concept of approximate inertial manifolds was introduced by Foiaset al. (1987) in the case of the two-dimensional Navier-Stokes equations. These manifolds are finite dimensional smooth manifolds such that the orbits enter a very thin neighborhood of the manifold after a transient time; this concept replaces the one of inertial manifold when either an inertial manifold does not exist or its existence is not known. Our aim in this paper is to prove that approximate inertial manifolds exist for reaction-diffusion equations in high space dimension by opposition with exact inertial manifolds whose existence has only been proved in low dimension and for which nonexistence results have been obtained in space dimensionn=4.     

惯导系统初始对准技术综述

从初始对准误差模型及算法、状态估计方法、可观测度分析和传递对准四个方面，对惯导系统初始对准技术研究现状进行了叙述和分析，探讨了惯导系统初始对准技术面临的亟待解决的问题和未来的发展方向，为我国在这一领域开展研究的研究人员提供了一定的参考。     

基于低温物理效应的新型超高精度陀螺仪研究综述

综述了基于低温玻色—爱因斯坦凝聚状态新物理效应的量子陀螺和超流体陀螺的研究动态。对两类新原理陀螺所使用的物理效应、工作原理、技术现状等方面进行了阐述。量子陀螺依据物质波的Sagnac效应测量角速率,具有比光学陀螺高若干数量级的测量精度;基于超流体低粘性和量子涡旋特性的超流体陀螺,原理上有望达到超高精度。最后分析了两类陀螺的发展前景。     

一种舰船变形测量方法的研究与应用

以舰船船体结构、惯性导航系统、被试导航设备以及天文经纬仪为物理对象，提出了一套利用光学系统原理和计算机图像处理技术对联合基座进行水平变形测量的方法，解决了各设备因安装位置的不同所造成的安装基座间产生的水平变形量问题。